Search
Hotline: +49 6441 38330 0 info@phone-distribution.de
Current filter
RefurbishedManufacturer Part Number: S30810-Q2923-X
Analog subscriber module 16SLA (16 a/b)
RefurbishedManufacturer Part Number: S30810-Q2923-X000
Analog subscriber module 16SLA FC (16 a/b)
RefurbishedManufacturer Part Number: S30810-Q2191-C100
Analog subscriber module (8 a / b)
RefurbishedManufacturer Part Number: S30810-Q2246-X
The SLMA2 (Subscriber Line Module Analog) fully provides 24 analog subscriber lines and supports all functions of (on-line) analog telephone sets. The SLMA2 provides upgraded functionality from the SLMA2 board. The SLMA2 is compatible with the SLMA. In additon, with the aid of a SIPAC/SIVAPAC adapter, the SLMA2 can also be used in an LTU shelf without any modifications to existing hardware.
However, the system software must be upgraded to V3.5. Any of the 24 lines can be connected to any of the 128 time slots available in the LTUE-shelf.
RefurbishedManufacturer Part Number: S30810-Q2191-X000
Analog subscriber module SLMA3 for Hicom 300E 3.0, Hicom 300H und Hipath 4000
RefurbishedManufacturer Part Number: S30810-Q2191-C300
The SLMA (Station Line Module Analog) board is the interface between the analog stations and the HiPath 3800 system. One board contains the trunk for 24 station lines. Each of these trunks contains the required feed, ringing and indication circuitry. The front panel of the board contains an LED, which lights whenever a circuit is busy.
For connection of:
RefurbishedManufacturer Part Number: S30810-Q2225-X
The modules SLMAE (Subscriber Line Module Analog Enhanced) represent analog a / b interfaces for use in HiPath
RefurbishedManufacturer Part Number: L30251-U600-A599, S30810-Q2225-X100
The modules SLMAE8 (Subscriber Line Module Analog Enhanced) represent analog a / b interfaces for use in HiPath 3800 V6.0 SMR-10 is available:
SLMAE8 (S30810-Q2225-X100) = 8 analog a / b interfaces
RefurbishedManufacturer Part Number: S30817-Q626-A520
The TML8W board offers eight analog trunk lines according to the analog/PSTN procedure.
RefurbishedManufacturer Part Number: S30810-Q2960-X100
CBMOD central control module for Hicom 150
The CBMOD-module board S30810-Q2960-X100 is the central-control-module board for the Hicom 150E OfficePro with a 2 MB DRAM-storage, which enables all central cotrol- and networking functions. The following module boards can be placed in the CBMOD slot:
Compatible to the following systems:
RefurbishedManufacturer Part Number: S30810-Q2960-X200
The CBMOD module board S30810-Q2960-X200 is the central-control-module board for the Hicom 150E OfficePro with a 4 MB DRAM-storage, from which all central cotntrol- and administrative-functions are operated. The following module boards can be installed in the CBMOD slot to fill certain reuquirements:
Compatible with the following systems:
RefurbishedManufacturer Part Number: S30810-Q2932-B201
CBPC central control board for the Hicom 150E
RefurbishedManufacturer Part Number: S30810-Q2924-X
Siemens CONBOConnection board
RefurbishedManufacturer Part Number: S30810-Q2009-X001
DCL Data Communication Link for Hicom300
The DCL (Data Communication Link) provides the signaling interface between the controller and the peripheral line trunk units LTU or the service unit SU.It controls the signaling flow of up to eight multiplexed signaling lines.The front panel of the DCL contains a 7-segment display, a RUN-LED (variant with wide panel), a reset key, a monitor key and a V.24 interface.
RefurbishedManufacturer Part Number: S30810-Q2009-X1
RefurbishedManufacturer Part Number: S30810-Q2196-X
Suitable for:
RefurbishedManufacturer Part Number: L30251-U600-A984, S30810-Q2344-X100
RefurbishedManufacturer Part Number: S30810-Q2185-X
The digital interface unit DIUC is used to connect digital exchange systems and PABXs via PCM30 lines or analog exchange systems and PABXs via A/D converters, PCM30 multiplexers and PCM30 lines to Hicom.
RefurbishedManufacturer Part Number: S30810-Q2185-X000
RefurbishedS30810-Q2096-X200-10
The DIUS2 (Digital Interface Unit ISDN) implements two S2 primary rate access (PRA) interfaces in the Hicom 300 system according to CCITT:
{{.}}
{{{.}}}
