Search
Current filter
NEW Item Manufacturer Part Number: B001D0J7ZK
Refurbished Manufacturer Part Number: S30122-K5902-X-3
IN: 115/230VAC 3/1,5A 50/60HZ
OUT: +5,1V/13A; +5,1(L)v/3A; -5V/0,5A; +12V/2A; -12V/0,5A; -48(T)V/1,5A
Refurbished Manufacturer Part Number: S30807-H5430-X006-03 S30807-H5430-X6-03 (PU) S30807-H5459-X-6-7411 S30807-H5432-X-11-11
The attendant console is the answering station for the Hicom 300 system and is used for switching external calls under the supervision of the attendant.
The basic configuration of the attendant console consists of the following units:
Refurbished
Frame: S30124-H5018-X-7 (PU) Plate frame (for built-in shelf) to receive SCSI drives
Card : S30807-Q6110-X000-C1
Drive: FUJITSU D33073 Model: MAW3073NP Ultra 320 SCSI / 68-pin / LVD Rated: 1.20A +12 V / +5 V 1.00A
Refurbished Manufacturer Part Number: S30807-U6625-X
Only the HiPath 4000 Box without modules.
Refurbished Manufacturer Part Number: S30810-Q2246-X
The SLMA2 (Subscriber Line Module Analog) fully provides 24 analog subscriber lines and supports all functions of (on-line) analog telephone sets. The SLMA2 provides upgraded functionality from the SLMA2 board. The SLMA2 is compatible with the SLMA. In additon, with the aid of a SIPAC/SIVAPAC adapter, the SLMA2 can also be used in an LTU shelf without any modifications to existing hardware.
However, the system software must be upgraded to V3.5. Any of the 24 lines can be connected to any of the 128 time slots available in the LTUE-shelf.
Refurbished Manufacturer Part Number: S30810-Q2234-X100
The SICOE (Signaling Unit with Conference and Extension) supplies the 600 ECX system with audible tones, announcements, music on hold and the central switching network extension.
The SICOE consists of the following functional units:
Refurbished Manufacturer Part Number: S30810-Q2270-X100
with (LAN) S30807-Q6618 & Memory Module 256 MB RAM
Refurbished S30810-Q2058-X-L1 The front panel of the board contains one LED and two measuring access jacks.
The LED operation indicator extinguishes when the voltage drops below 30 V. The voltage can be measured via the measuring jacks in the front panel. The ring generator alternatively generates alternating voltage of 65 V or 85 V with the frequencies 25 Hz or 50 Hz for ringing the analog stations or for AC signaling in tie traffic. When used as ring current generator RG the ring AC is lead to pinout 1 with ground. When used as AC current generator WG the alternating current is symmetrically lead to pinout 2 for signaling. The AC cables within the cabinets are connected to three LTUS for Hicom 340.1/ 340.2/370.1 and via two LTUS for Hicom 390.1. The maximum output current for each generator is 10 VA.
If more power or safety backup is desired, one generator may be configured per shelf and operating mode. In this case, the respective Faston plug must be removed (see figure: Assignment of AC current cables). If the board is configured as an AC current generator (ACGEN), the dependability system blocks all TMBCT boards when the board is unplugged.
The operating mode and the desired voltage (65 V or 85 V) are set via AMO BCSU.
Refurbished Manufacturer Part Number: S30810-Q2214-X100
The TMOM2 (Trunk Module Outgoing Multipurpose) module contains two adapter sets for connecting special equipment (peripheral devices). In certain circumstances, it can be used as an outgoing circuit in order to facilitate tie-line connections. The operating mode is set by AMO TSCSU. The two circuits on the module can be operated differently, independently of each other.
Refurbished Manufacturer Part Number: S30810-Q2191-C300
The SLMA (Station Line Module Analog) board is the interface between the analog stations and the HiPath 3800 system. One board contains the trunk for 24 station lines. Each of these trunks contains the required feed, ringing and indication circuitry. The front panel of the board contains an LED, which lights whenever a circuit is busy.
For connection of:
Refurbished Manufacturer Part Number: S30810-Q2144-X
Expansion module for connection of 16 digital subscribers (UPo / E) for Hicom 300, Hicom 300 E, Hicom 300 H.
Refurbished Manufacturer Part Number: S30810-Q2225-X
The modules SLMAE (Subscriber Line Module Analog Enhanced) represent analog a / b interfaces for use in HiPath
Refurbished Manufacturer Part Number: S30810-Q2960-X200
CBMOD central control module for Hicom 150
The CBMOD module board S30810-Q2960-X200 is the central-control-module board for the Hicom 150E OfficePro with a 4 MB DRAM-storage, from which all central cotntrol- and administrative-functions are operated. The following module boards can be installed in the CBMOD slot to fill certain reuquirements:
Compatible with the following systems:
Refurbished Manufacturer Part Number: S30810-Q2312-X
RTM Rear Transition Module
Refurbished Manufacturer Part Number: S30810-Q2311-X
DSCXL Data and Switch Processor for CompactPCI/LAN
NEW Item Manufacturer Part Number: L30251-U600-A389 Power cable EU 2,5m
NEW Item Manufacturer Part Number: L30251-F600-A373 S30122-X8018-X10 Plugged feet for Profiset 3030
NEW Item Manufacturer Part Number: S30817-H844-A401
Analog Expansion Card for HiPath 1120 EB204 (S30817-H844-A401) with two analog trunk lines and four analog telephone ports with CLIP.
{{.}}
{{{.}}}
