Search
Current filter
Refurbished Manufacturer Part Number: S30810-Q2940-X000
HiPath Hicom HG 1500 IP-Gateway HXGM 2 board The HXGM2 module S30810-Q2940-X is the Voice and Data Unit for HiPath 3000 and allows the connection between HiPath 3000 and a LAN environment.
Refurbished Manufacturer Part Number: S30810-Q2915-X
The Trunkmodul S2M (TMS2) makes the connection to a NT1 over a symmetrical line (four-wired twisted-pair cable) with the concurrent transmission of up to 30 B channels (voice channels) possible.
For Hipath 3750 / 3550 and Hicom 150 E OfficePro.
Refurbished Manufacturer Part Number: L30251-U600-A599, S30810-Q2225-X100
The modules SLMAE8 (Subscriber Line Module Analog Enhanced) represent analog a / b interfaces for use in HiPath 3800 V6.0 SMR-10 is available:
SLMAE8 (S30810-Q2225-X100) = 8 analog a / b interfaces
Refurbished Manufacturer Part Number: S30810-Q2190-X
The LBU (Line Control / Line Bus Control) board for Hicom 300E offers two V.24 interfaces on the front panel for connecting terminals and/or data processing systems. In addition, the board links active peripheral boards with the DP multibus for configuring the service modules.
The two functional units are entirely separate, so that the line control and line bus control can be operated separately or together, at the appropriate slots. The operating mode decoder of the LBU determines the operating mode according to the occupied slot. The front panel of the board contains 3 LEDs (RUN, H2, H3), 1 INT-key and 2 V.24 interfaces.
Refurbished Manufacturer Part Number: S30810-Q2191-C300
The SLMA (Station Line Module Analog) board is the interface between the analog stations and the HiPath 3800 system. One board contains the trunk for 24 station lines. Each of these trunks contains the required feed, ringing and indication circuitry. The front panel of the board contains an LED, which lights whenever a circuit is busy.
For connection of:
Refurbished Manufacturer Part Number: S30810-Q2936-X, L30251-U600-G226
The CBCPR control module from the HiPath 3750 and HiPath 3700.
Refurbished Manufacturer Part Number: S30810-Q2144-X
Expansion module for connection of 16 digital subscribers (UPo / E) for Hicom 300, Hicom 300 E, Hicom 300 H.
Refurbished Manufacturer Part Number: S30810-Q2128-X
The LTUC-module board S30810-Q2128-X (Line Trunk Unit Control) for the Hicom 300 & Hicom 300E which constitutes the interface between the transducer for the signaling-channel DCL, the crossbar switch CN and the peripheral BG of the LTU-frame.
This board implements the switchover from redundant central sytem units to the non-redundant periphery and the electrical conversion and decoupling. In the LTUC, the lines for the speech channels, signaling channels, clock lines and reset signals are converted from balanced to imbalanced signals and transferred from the currently active control to the peripheral board with the shelf, and vice versa.
Compatible only with the following system:
Refurbished Manufacturer Part Number: S30810-Q2174-X
The Station/Trunk Module Digital S0 board STMD8 offers an interface of the functions from TMD and SLMS. It contains eight sets with S0-interface.
compatible with:
Refurbished Manufacturer Part Number: S30810-Q2164-X000
The module-board SLMO1 (Subscriber Line Module) has 16 interfaces according to the UP0/E-Standard. The system telephones, Optiset E and optiPoint 500, are connected to the module-board.
The board is compatible in the following systems; Hicom 300E , Hicom 300H and HiPath 4000.
Refurbished Manufacturer Part Number: S30810-Q2166-X000
LTUCX; Line Trunk Unit Control Extended
The line trunk unit control extended (LTUCX) board has twice the number of speech highways as in the former LTUCE board. It is supported for a standard LTU shelf by adding new 2x4x2 MB highways to the already existing 2x4x2 megabit highways. As an LTU shelf is devided into two shelf halfs, each shelf half supports 128TSL of bundle A and 128TSL of bundle F.
The additional speech highways can only be used by boards which support this feature (for example the DIU-N2 and DIU-N4 boards). Within the board configuration it is determined if the board uses the standard speech highways or the additional ones. Simultaneous use of all highways is not supported with this feature.
You can now use a few new boards (to access additional highways; reservation of many TSLs for every board; for example, DIU-N4 = 128 TSL) with a greater number of old boards (only access to the standard highways; reservation of few TSLs per board) together in the same shelf in a non blocking configuration.
Compatible:
Refurbished Manufacturer Part Number: S30810-Q2187-X000
The signaling interface unit peripheral extended (SIUX and SIUX2) boards for the Hicom 300E-300H, transmit and receive DTMF or MFC signals on eight channels to and from trunks and subscriber equipment. They also perform line diagnostic tests. The SIUX and the SIUX2 have exactly the same functionality. The SIUX2 is the replacement for the older board. Previous models of the SIUX board had SIVAPAC connectors. The New SIUX2 board has SIPAC connector. This board cannot be used as a central SIU.
Refurbished Manufacturer Part Number: S30810-Q2092-X
The TMEMW-module board S30810-Q2092-X (Trunk Module Ear & Mouth/World) has four dual-interconnection sets E&M for incoming and outgoing signals between the main- and sub-system.
Compatible with the following systems:
Refurbished Manufacturer Part Number: S30810-Q2225-X
The modules SLMAE (Subscriber Line Module Analog Enhanced) represent analog a / b interfaces for use in HiPath
Refurbished Manufacturer Part Number: S30810-Q2817
TRIMY HiPath Trading Workplace
Refurbished Manufacturer Part Number: S30810-Q2191-X000
Analog subscriber module SLMA3 for Hicom 300E 3.0, Hicom 300H und Hipath 4000
Refurbished Manufacturer Part Number: S30810-Q2193-X200
The SLC24 module S30810-Q2193-X200 (Subscriber Line Module cmi24) for Hicom 300E and HiPath 4000 with 24 UP0 / E interfaces used to connect CMI base stations and the management of the Cordless subscribers.
Refurbished Manufacturer Part Number: S30810-Q2092-X200
The TMEMW-module board S30810-Q2092-X200 (Trunk Module Ear & Mouth/World) has four dual-interconnection sets E&M for incoming and outgoing signals between the main- and sub-system.
Refurbished Manufacturer Part Number: S30810-Q2139-X000
The function of the PSIO is to provide a total of six V.24 interfaces having enhanced functionality and higher data rates.
A Hicom 3X3 can accomodate a maximum of 2 PSIO boards (12 V.24 interfaces). Max 2 PSIO can be installed in the CC80 or CC80W shelf, in slots 61 and 73 (special slots). The PSIO board is connected to the SCC module via an HDLC channel. The board is connected via a so-called "Hydra" cable (cable plug in the panel of the Hicom 3X3 has 4 cable outlets and V.24 interfaces). For CC80 shelves, the PSIO board may only be plugged into slot 60). In all other cases, it can be plugged into any peripheral slot available. The module must be configured by means of AMOs BCSU and BCSM. Different operating modes are possible for the PSIO, since the loadware for asynchronous terminal tranmission and synchronous terminal transmission have been combined. The front panel of the board contains a 7-segment display, one LED and two V.24 interfaces.
Refurbished Manufacturer Part Number: S30810-Q2163-X
The STMD2 (Station/Trunk Module Digital S0+SLMS2 Station Line Module Digital S0) board comprises the STMD and SLMS function on one single board. The STMD2 covers all features which are provided by the replaced modules. It contains eight trunks with S0 interfaces. Each S0 connection (4-wire-system) constitutes a basic access with two B-channels (64 kbits/s each) for speech/data and a D-channel (16 kbits/s).
Description of STMD/SLMS modul:
{{.}}
{{{.}}}