Search
Current filter
Refurbished Manufacturer Part Number: S30810-Q2187-X
The signaling interface unit peripheral extended (SIUX and SIUX2) boards for the Hicom 300E-300H, transmit and receive DTMF or MFC signals on eight channels to and from trunks and subscriber equipment. They also perform line diagnostic tests. The SIUX and the SIUX2 have exactly the same functionality. The SIUX2 is the replacement for the older board. Previous models of the SIUX board had SIVAPAC connectors. The New SIUX2 board has SIPAC connector. This board cannot be used as a central SIU.
Refurbished Manufacturer Part Number: S30810-Q2166-X
LTUCX; Line Trunk Unit Control Extended
The line trunk unit control extended (LTUCX) board has twice the number of speech highways as in the former LTUCE board. It is supported for a standard LTU shelf by adding new 2x4x2 MB highways to the already existing 2x4x2 megabit highways. As an LTU shelf is devided into two shelf halfs, each shelf half supports 128TSL of bundle A and 128TSL of bundle F.
The additional speech highways can only be used by boards which support this feature (for example the DIU-N2 and DIU-N4 boards). Within the board configuration it is determined if the board uses the standard speech highways or the additional ones. Simultaneous use of all highways is not supported with this feature.
You can now use a few new boards (to access additional highways; reservation of many TSLs for every board; for example, DIU-N4 = 128 TSL) with a greater number of old boards (only access to the standard highways; reservation of few TSLs per board) together in the same shelf in a non blocking configuration.
Compatible:
Refurbished Manufacturer Part Number: S30810-Q2316-X
STMI (60 channels)
For Siemens HiPath Systems
Refurbished Manufacturer Part Number: S30810-Q2537-X
TMS2M S30810-Q2537-X
The TMS2M is an expansion board for Siemens Hicom 150E Office Pro with a primary rate access (S2M)
Refurbished Manufacturer Part Number: S30810-Q2558-X300
STMD S30810-Q2558-X300
Refurbished Manufacturer Part Number: S30810-Q2915-X
TMS2 S30810-Q2915-X
Refurbished Manufacturer Part Number: S30810-Q2930-X100
HXGM HG 1500 S30810-Q2930-X100
Refurbished Manufacturer Part Number: S30810-Q2943-X
HiPath HXGS3 HG 1500 V3.0 for HiPath 3350/3550 with 2 slots for expansion modules
Refurbished Manufacturer Part Number: S30810-Q2960-X100
CBMOD central control module for Hicom 150
The CBMOD-module board S30810-Q2960-X100 is the central-control-module board for the Hicom 150E OfficePro with a 2 MB DRAM-storage, which enables all central cotrol- and networking functions. The following module boards can be placed in the CBMOD slot:
Compatible to the following systems:
Refurbished Manufacturer Part Number: S30810-Q2960-X200
The CBMOD module board S30810-Q2960-X200 is the central-control-module board for the Hicom 150E OfficePro with a 4 MB DRAM-storage, from which all central cotntrol- and administrative-functions are operated. The following module boards can be installed in the CBMOD slot to fill certain reuquirements:
Compatible with the following systems:
Refurbished Manufacturer Part Number: S30817-Q626-A520
The TML8W board offers eight analog trunk lines according to the analog/PSTN procedure.
Refurbished Manufacturer Part Number: S30810-Q2932-B201
CBPC central control board for the Hicom 150E
Refurbished Manufacturer Part Number: S30810-Q2122-X
MTS Memory Time Switch
Refurbished Manufacturer Part Number: S30810-Q2029-X100
PCG Peripheral Clock Generator
The PCG-module S30810-Q2029-X100 (Peripheral Clock Generator) for Hicom 300 / 300E is the clock for the operated synchronously Hicomsystem.
features:
Use in: Hicom 300
Refurbished Manufacturer Part Number: S30810-Q2009-X1
DCL Data Communication Link for Hicom300
The DCL (Data Communication Link) provides the signaling interface between the controller and the peripheral line trunk units LTU or the service unit SU. It controls the signaling flow of up to eight multiplexed signaling lines. The front panel of the DCL contains a 7-segment display, a RUN-LED (variant with wide panel), a reset key, a monitor key and a V.24 interface.
Refurbished Manufacturer Part Number: S30810-Q2009-X001
Refurbished Manufacturer Part Number: S30810-Q2113-X
The QDCL-module board S30810-Q2113-X (Quad Data Communication Link) for the Hicom 350E serves as an interface between the peripheral and the central data-processor DP (DP4L or DM3L). The module board consists of two function-units:
Compatible with the following systems: Hicom 300E
Refurbished Manufacturer Part Number: S30810-Q2120-X
The LCS0-module board S30810-Q2120-X enables via 2 S 0-ports the connection of terminals to the Hicom 300 according the the AMI-Code-process. The data-rate is 144 kbit/s, consisting of two transmission channels and a signalizing channel (2 x 64 kbit/s + 16 kbit/s).
Specifications:
Refurbished Manufacturer Part Number: S30810-Q2115-X
SLMU 16
The SLMU-module board S30810-Q2115-X (Station Line Module Digital U P0) enables the connection via 16 U P0-interfaces of Siemens SET 551 or PNTs telephones.
Direct-current supply:
Compatible to the following:
Refurbished Manufacturer Part Number: S30810-Q2031-X
SIU Signaling Unit
The SIU-module board S30810-Q2031-X (Signaling Unit) for the Hicom 300/300E, which provides the system with audbile tones, announcements and music-on-hold.
SIU as an extension-unit on a SWU, offers the following functions:
Compatible with the following systems: Hicom 300
{{.}}
{{{.}}}