Search
Hotline: +49 6441 38330 0 info@phone-distribution.de
Current filter
RefurbishedManufacturer Part Number: S30810-Q2230-X
The DM3L (Data Processor Mono 386 with LAN-Interface) board for Hicom 300/300E, is divided into three blocks according to function. The main processor unifies the functionality of the DP and IOPA modules. A 386DX microprocessor with 50MHz clock frequency (25 MHz processor bus frequency) is used as the CPU. This microprocessor has access to a local bus and to the system bus. On-board I/O ports and memory, local memory and the SCSI and LAN controllers with their I/O ports are connected to the local bus. The V.24 block comprises the LCU function. Its control can be assumed either by the 386DX via the local bus, or by the signal processor configurable by software.
With the SCSI interface the DM3L connects to external bulk data storage systems. The LAN node forms a high speed interface to other modules and off-system components.
RefurbishedManufacturer Number: S30810-Q2260-X
The card DM4L (Data Processor Mono 486 with LAN) covers the same functionality as the card DM3L but brings higher performance to the systems 310E and 350E.
Although being software compatible there are slight differences in the non-volatile memory and the card's internal initialization which can be handled during system boot.
RefurbishedManufacturer Part Number: S30810-Q2250-X100
The DP4L (Data Processor 486 with LAN Node) is based on the DP486 board. As far as possible, the implementation is compatible to the DM3L module. Following features have been adapted:
RefurbishedManufacturer Part Number: S30810-Q2270-X000, S30807-Q6705
with (LAN) S30807-Q6618 & Memory Module 256 MB RAM
RefurbishedManufacturer Part Number: S30810-Q2270-X100
RefurbishedManufacturer Part Number: S30810-Q2261-X000
The data processor board and serial channel extended (DSCX) board is the central processor of the HiPath 4000. This board performs ADP processing, which includes controlling the SCSI bus and provides basic system switching functions, tone processing (incoming), conference bridge, system clock control, and HDLC / VXDX termination.
RefurbishedManufacturer Part Number: S30810-Q2305-X with Q5697-X100-5
NCUI2 (60 channels) (inc Q5697-X100) for Siemens HiPath 4000
RefurbishedManufacturer Part Number: S30810-Q2936-X, L30251-U600-G226
The CBCPR control module from the HiPath 3750 and HiPath 3700.
RefurbishedManufacturer Part Number: S30810-Q2936-X000, L30251-U600-G226
The CBCPR board handles the central control and switching operations of the the HiPath 3750 and HiPath 3700.
RefurbishedS30810-Q2143-X-02The hub controller (HUBC) board is required to support the local area network (LAN) in all HiPath 4500 configurations. This board provides the physical link between the administration and data processor (ADP), active switching unit (SWU), and standby SWU. The HUBC board is a centralized wiring hub for the twisted pair Ethernet star topology. It is controlled by the ADP. The HUBC board provides basic Ethernet management. The ADP uses free I/O addresses to access the HUBC board through the multibus 1 interface. The ADP reads the HUBC board port status information and disables ports if necessary. The ADP writes the link status for the eight twisted pair ports to the HUBC board LED register, providing the port status LED indications. The HUBC board is installed in slot 25 and controlled by the ADP (DPC5 in slot 31).
RefurbishedManufacturer Part Number: S30810-Q2143-X000-02
The hub controller (HUBC) board is required to support the local area network (LAN) in all HiPath 4500 configurations. This board provides the physical link between the administration and data processor (ADP), active switching unit (SWU), and standby SWU. The HUBC board is a centralized wiring hub for the twisted pair Ethernet star topology. It is controlled by the ADP.
The HUBC board provides basic Ethernet management. The ADP uses free I/O addresses to access the HUBC board through the multibus 1 interface. The ADP reads the HUBC board port status information and disables ports if necessary. The ADP writes the link status for the eight twisted pair ports to the HUBC board LED register, providing the port status LED indications. The HUBC board is installed in slot 25 and controlled by the ADP (DPC5 in slot 31).
RefurbishedManufacturer Part Number: S30810-Q2930-X100
HXGM HG 1500 S30810-Q2930-X100
RefurbishedManufacturer Part Number: S30810-Q2940-X000
HiPath Hicom HG 1500 IP-Gateway HXGM 2 boardThe HXGM2 module S30810-Q2940-X is the Voice and Data Unit for HiPath 3000 and allows the connection between HiPath 3000 and a LAN environment.
RefurbishedManufacturer Part Number: S30810-Q2942-X
Connection of a local LAN to the HiPath 3000 and connection with external LANs over the ISDN and DSL interfaces of the HiPath 3000
The HXGM3 board prepares the functions of the HiPath HG1500 Version 3.0 for the HiPath 3750 and HiPath 3700.Connection of a local LAN to the HiPath 3000 and connection with external LANs over the ISDN and DSL interfaces of the HiPath 3000Support of the conventional functions of ISDN and DSL Routers with the additional functions of a media gateway for the transmission of voice, fax, and data.Forwarding of conversations between IP based networks (LAN, Intranet, Internet) and circuit switched networkes (ISDN, PSTN)
The HXGM3 board is compatible to the HiPath HG 1500 V2.0 board HXGM2. A mixed installation of both boards in a system is possible.
RefurbishedManufacturer Part Number: S30810-Q2190-X
The LBU (Line Control / Line Bus Control) board for Hicom 300E offers two V.24 interfaces on the front panel for connecting terminals and/or data processing systems. In addition, the board links active peripheral boards with the DP multibus for configuring the service modules.
The two functional units are entirely separate, so that the line control and line bus control can be operated separately or together, at the appropriate slots. The operating mode decoder of the LBU determines the operating mode according to the occupied slot. The front panel of the board contains 3 LEDs (RUN, H2, H3), 1 INT-key and 2 V.24 interfaces.
RefurbishedManufacturer Part Number: S30810-Q2128-X
The LTUC-module board S30810-Q2128-X (Line Trunk Unit Control) for the Hicom 300 & Hicom 300E which constitutes the interface between the transducer for the signaling-channel DCL, the crossbar switch CN and the peripheral BG of the LTU-frame.
This board implements the switchover from redundant central sytem units to the non-redundant periphery and the electrical conversion and decoupling. In the LTUC, the lines for the speech channels, signaling channels, clock lines and reset signals are converted from balanced to imbalanced signals and transferred from the currently active control to the peripheral board with the shelf, and vice versa.
Compatible only with the following system:
RefurbishedManufacturer Part Number: S30810-Q2248-X
The LTUCE (Line Trunk Unit Control Extended) is the interface between central and peripheral parts of the system. It has an interface to the MTSCG /SICOE and the QDCL boards of both common controls. The transmission mode to and from the common control is balanced. On the peripheral part the LTUCE has an interface to all boards in the shelf with an unbalanced transmission mode. The LTUCE selects the signals from the active common control and distributes them in the LTU-Shelf (LTU-Shelf is a general expression for the peripheral-shelf. It can be one of the compact- or extended compact-shelf). The LTUCE also receives signals from the peripheral boards and transmits them to the common control.
The front panel of the module contains one red and one green LED.
RefurbishedManufacturer Part Number: S30810-Q2248-X000
The LTUCE (Line Trunk Unit Control Extended) is the interface between central and peripheral parts of the system. It has an interface to the MTSCG /SICOE and the QDCL boards of both common controls. The transmission mode to and from the common control is balanced. On the peripheral part the LTUCE has an interface to all boards in the shelf with an unbalanced transmission mode.
The LTUCE selects the signals from the active common control and distributes them in the LTU-Shelf (LTU-Shelf is a general expression for the peripheral-shelf. It can be one of the compact- or extended compact-shelf). The LTUCE also receives signals from the peripheral boards and transmits them to the common control.
RefurbishedManufacturer Part Number: S30810-Q2166-X
LTUCX; Line Trunk Unit Control Extended
The line trunk unit control extended (LTUCX) board has twice the number of speech highways as in the former LTUCE board. It is supported for a standard LTU shelf by adding new 2x4x2 MB highways to the already existing 2x4x2 megabit highways. As an LTU shelf is devided into two shelf halfs, each shelf half supports 128TSL of bundle A and 128TSL of bundle F.
The additional speech highways can only be used by boards which support this feature (for example the DIU-N2 and DIU-N4 boards). Within the board configuration it is determined if the board uses the standard speech highways or the additional ones. Simultaneous use of all highways is not supported with this feature.
You can now use a few new boards (to access additional highways; reservation of many TSLs for every board; for example, DIU-N4 = 128 TSL) with a greater number of old boards (only access to the standard highways; reservation of few TSLs per board) together in the same shelf in a non blocking configuration.
Compatible:
RefurbishedManufacturer Part Number: S30810-Q2166-X000
{{.}}
{{{.}}}